E5700 and E2800 System Monitoring Guide
Status indicators on E5700SG controller
The seven-segment display and the LEDs on the E5700SG controller show status and
error codes while the appliance powers up and while the hardware is initializing. You can
use these displays to determine status and troubleshoot errors.
After the StorageGRID Appliance Installer has started, you should periodically review the status indicators on
the E5700SG controller.
Display
Description
1
Attention LED
Amber: The controller is faulty and
requires operator attention, or the
installation script was not found.
Off: The controller is operating
normally.
2
Seven-segment display
Shows a diagnostic code
Seven-segment display sequences
enable you to understand errors
and the operational state of the
appliance.
3
Expansion Port Attention LEDs
Amber: These LEDs are always
amber (no link established)
because the appliance does not
use the expansion ports.
4
Host Port Link Status LEDs
Green: The link is up.
Off: The link is down.
9
