NetApp SteelStore 30 Series, Руководство пользователя

Страница: 62 / 71

Module Replacement
57
SteelStore models require specific placement of the memory as indicated in the following table.
Appliance Memory Required Slot Locations
SteelStore 730 6 x 4 GB Slots 2, 4, 6, 8, 10, 12
SteelStore 2030 6 x 8 GB Slots 2, 4, 6, 8, 10, 12
SteelStore 3030 6 x 16 GB Slots 2, 4, 6, 8, 10, 12
In general, populate as many Slot 0 (blue) slots first, before starting to populate any Slot 1 (black) slots.
Important Replacing the existing memory module with a module of a different size causes the system to fail.
You must use approved memory modules. Contact NetApp Support at

https://mysupport.netapp.com to obtain the correct memory modules.
1
Remove the installed module by pushing both retaining clips sideways and pulling the module out of the
slot.
2
Insert the module into the correct slot, aligning the notch on the module with the socket.
3
Push the module down until the retaining clips lock on each side.
Figure 6–15 Removing a RAM Module
Figure 6–16 Inserting a RAM Module