NetApp SteelStore 30 Series, Руководство пользователя

Страница: 11 / 71

NetApp SteelStore Cloud Integrated Storage xx30 Series Hardware Owner’s Manual
6
Warning The removal of the enclosure top cover or the power supply mounting cage must only be
performed by a service person. Potential hazards include rotating fans and hot surfaces.
The top cover must be secured when the enclosure is in normal use by rotating the lock 90° to the
“locked” position (this is to prevent users/operators from accessing service areas).
1.2 Safety
The SteelStore must only be operated from a power supply input voltage range of 100 to 240 VAC, 50
to 60 Hz.
Make sure that the socket outlets are located near the equipment and are easily accessible.
This equipment is intended to operate with two working Power Supply Units (PSUs) housed in a power
supply mounting cage. Before removal/replacement of a PSU, disconnect all supply power for complete
isolation.
A faulty PSU must be replaced with a fully operational PSU within 24 hours. Refer to section A.3,
“Environment” on page 62 .
Table 1–1 Lifting Warning Label
Figure 1–1 Power Supply Mounting Cage Warning Label