manualshive.com logo in svg

NetApp SG100, Руководство по установке и обслуживанию оборудования

Поделиться
Скачать
NetApp SG100 Скачать руководство пользователя страница 68

•

install

 for starting a StorageGRID installation

•

monitor

 for monitoring a StorageGRID installation

•

reboot

 for rebooting the appliance

If you enter a subcommand (advanced, configure, install, monitor, or reboot) argument
followed by the --help option you will get a different help text providing more detail on the
options available within that subcommand:

configure-sga.py subcommand --help

3. To confirm the current configuration of the appliance node, enter the following where 

SGA-

install-ip

 is any one of the IP addresses for the appliance node:

configure-sga.py configure SGA-INSTALL-IP

The results show current IP information for the appliance, including the IP address of the
primary Admin Node and information about the Admin, Grid, and Client Networks.

Connecting to https://10.224.2.30:8443 (Checking version and connectivity.)

2021/02/25 16:25:11: Performing GET on /api/versions... Received 200

2021/02/25 16:25:11: Performing GET on /api/v2/system-info... Received 200

2021/02/25 16:25:11: Performing GET on /api/v2/admin-connection... Received 200

2021/02/25 16:25:11: Performing GET on /api/v2/link-config... Received 200

2021/02/25 16:25:11: Performing GET on /api/v2/networks... Received 200

2021/02/25 16:25:11: Performing GET on /api/v2/system-config... Received 200

  StorageGRID Appliance

    Name:        LAB-SGA-2-30

    Node type:   storage     

  StorageGRID primary Admin Node

    IP:        172.16.1.170   

    State:     unknown        

    Message:   Initializing...

    Version:   Unknown        

  Network Link Configuration

    Link Status

          Link      State      Speed (Gbps)

          ----      -----      -----       

          1         Up         10          

          2         Up         10          

          3         Up         10          

          4         Up         10          

          5         Up         1           

          6         Down       N/A         

    Link Settings

        Port bond mode:      FIXED                               

        Link speed:          10GBE                               

                                                                 

        Grid Network:        ENABLED                             

            Bonding mode:    active-backup                       

            VLAN:            novlan                              

            MAC Addresses:   00:a0:98:59:8e:8a  00:a0:98:59:8e:82

                                                                 

        Admin Network:       ENABLED                             

            Bonding mode:    no-bond                             

            MAC Addresses:   00:80:e5:29:70:f4                   

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances 

68

Deploying a services appliance node

Содержание SG100







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды