manualshive.com logo in svg

NetApp SG100, Руководство по установке и обслуживанию оборудования

Поделиться
Скачать
NetApp SG100 Скачать руководство пользователя страница 63

The blue status bar indicates which task is currently in progress. Green status bars indicate
tasks that have completed successfully.

Note: The installer ensures that tasks completed in a previous install are not re-run. If you
are re-running an installation, any tasks that do not need to be re-run are shown with a green
status bar and a status of "Skipped."

2. Review the progress of first two installation stages.

1. Configure storage

During this stage, the installer clears any existing configuration from the drives in the
appliance, and configures host settings.

2. Install OS

During this stage, the installer copies the base operating system image for StorageGRID
to the appliance.

3. Continue monitoring the installation progress until one of the following processes occurs:

•

For all appliance nodes except the primary Admin Node, the Install StorageGRID stage
pauses and a message appears on the embedded console, prompting you to approve this
node on the Admin Node using the Grid Manager. Go to the next step.

•

For appliance primary Admin Node installation, you do not need to approve the node. The
appliance is rebooted. You can skip the next step.

Note: During installation of an appliance primary Admin Node, a fifth phase appears
(see the example screen shot showing four phases). If the fifth phase is in progress for
more than 10 minutes, refresh the web page manually.

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances 

63

Deploying a services appliance node

Содержание SG100







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды