manualshive.com logo in svg

NetApp SG100, Руководство по установке и обслуживанию оборудования

Поделиться
Скачать
NetApp SG100 Скачать руководство пользователя страница 101

The KMS encryption key and all data are deleted from the node, and the appliance reboots.
This can take up to 20 minutes.

5. Open a browser, and enter one of the IP addresses for the appliance's compute controller.

https://Controller_IP:8443

Controller_IP

 is the IP address of the compute controller (not the storage controller) on any

of the three StorageGRID networks.

The StorageGRID Appliance Installer Home page appears.

6. Select Configure Hardware > Node Encryption.

7. Verify that node encryption is disabled and that the key and certificate information in Key

Management Server Details and the Clear KMS Key and Delete Data control are removed
from the window.

Node encryption cannot be reenabled on the appliance until it is reinstalled in a grid.

After you finish

After the appliance reboots and you have verified that KMS has been cleared and that the
appliance in a pre-install state, you can physically remove the appliance from your StorageGRID
system. See the recovery and maintenance instructions for information about preparing an
appliance for reinstallation.

Related information

Administering StorageGRID
Recovery and maintenance

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances 

101

Maintaining the appliance

Содержание SG100







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды