manualshive.com logo in svg

NetApp SG100, Руководство по установке и обслуживанию оборудования

Поделиться
Скачать
NetApp SG100 Скачать руководство пользователя страница 67

The Apply JSON configuration button is enabled.

5. Select Apply JSON configuration.

The configuration is applied to the selected node.

Automating installation and configuration of appliance nodes using the configure-sga.py
script

You can use the 

configure-sga.py

 script to automate many of the installation and

configuration tasks for StorageGRID appliance nodes, including installing and configuring a
primary Admin Node. This script can be useful if you have a large number of appliances to
configure. You can also use the script to generate a JSON file that contains appliance configuration
information.

Before you begin

•

The appliance has been installed in a rack, connected to your networks, and powered on.

•

Network links and IP addresses have been configured for the primary Admin Node using the
StorageGRID Appliance Installer.

•

If you are installing the primary Admin Node, you know its IP address.

•

If you are installing and configuring other nodes, the primary Admin Node has been deployed,
and you know its IP address.

•

For all nodes other than the primary Admin Node, all Grid Network subnets listed on the IP
Configuration page of the StorageGRID Appliance Installer have been defined in the Grid
Network Subnet List on the primary Admin Node.

•

You have downloaded the 

configure-sga.py

 file. The file is included in the installation

archive, or you can access it by clicking Help > Appliance Installation Script in the
StorageGRID Appliance Installer.

Note: This procedure is for advanced users with some experience using command-line
interfaces. Alternatively, you can also use the StorageGRID Appliance Installer to automate the
configuration.

Automating appliance configuration using the StorageGRID Appliance Installer

 on page 65

Steps

1. Log in to the Linux machine you are using to run the Python script.

2. For general help with the script syntax and to see a list of the available parameters, enter the

following:

configure-sga.py --help

The 

configure-sga.py

 script uses five subcommands:

•

advanced

 for advanced StorageGRID appliance interactions, including BMC

configuration and creating a JSON file containing the current configuration of the appliance

•

configure

 for configuring the RAID mode, node name, and networking parameters

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances 

67

Deploying a services appliance node

Содержание SG100







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды