iv. Open the cam handle, and slide the drive out carefully using both hands.
v. Place the drive on an antistatic, level surface.
vi. Insert the replacement drive into the slot all the way into the chassis using both hands.
vii. Press down the cam handle until it clicks.
viii. Reinstall the bezel.
ix. Notify NetApp Support about the drive replacement. NetApp Support will provide instructions for
returning the failed drive.
c. (
H610S only
) Perform the following steps:
i. Match the slot number of the failed drive from the Element UI with the number on the chassis. The
LED on the failed drive is lit amber.
ii. Remove the bezel.
iii. Press the release button, and remove the failed drive as shown in the following illustration:
Ensure that the tray handle is fully open before you attempt to slide the drive out of
the chassis.
iv. Slide the drive out, and place it on a static-free, level surface.
v. Press the release button on the replacement drive before you insert it into the drive bay. The drive
tray handle springs open.
vi. Insert the replacement drive without using excessive force. When the drive is inserted fully, you
17
