NetApp CN1610 Скачать руководство пользователя страница 101

Страница: 101 / 708

SNMP Commands

no snmp-server
host

This command removes the specified host entry.

snmp-server user

This command creates an SNMPv3 user for access to the system.

Parameter

Description

host-addr

The IPv4 or IPv6 address of the host to send the trap
or inform to.

traps

Send SNMP traps to the host. This option is selected
by default.

version 1

Sends SNMPv1 traps. This option is not available if
informs is selected.

version 2

Sends SNMPv2c traps. This option is not available if
informs is selected. This option is selected by
default.

informs

Send SNMPv2 informs to the host.

seconds

The number of seconds to wait for an
acknowledgement before resending the Inform. The
default is 15 seconds. The range is 1 to 300 seconds.

retries

The number of times to resend an Inform. The
default is 3 attempts. The range is 0 to 255 retries.

community-string

Community string sent as part of the notification.
The range is 1 to 20 characters.

port

The SNMP Trap receiver port. The default is port
162.

filter-name

The filter name to associate with this host. Filters
can be used to specify which traps are sent to this
host. The range is 1 to 30 characters.

Format

no snmp-server host

host-addr

[traps|informs]

Mode

Global Config

Содержание CN1610





































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CN1610

Отзывы:

Бренды по названию

Популярные бренды

NetApp CN1610, Справочник команд интерфейса командной строки

Результаты поиска

Содержание CN1610

Отзывы:

Бренды по названию

Популярные бренды