manualshive.com logo in svg

NetApp AltaVault AVA400, Руководство администратора

Поделиться
Скачать
NetApp AltaVault AVA400 Скачать руководство пользователя страница 49

NetApp AltaVault Cloud Integrated Storage Administration Guide

   

   49

        

Beta Draft

Configuring SnapMirror

Configuring storage settings

2.

To view the list of Snapshots for a share, select a share and review the Snapshot information:

To delete SnapMirror shares and Snapshots on AltaVault

1.

To remove a share or Snapshot, select the share or Snapshot and click 

Remove Selected.

Snapshots can be deleted on the AltaVault through ONTAP SnapMirror policies or SnapCenter policies, or by 
manual deletion on AltaVault. When a share is deleted, Snapshots belonging to that share are also deleted. 
AltaVault reclamation will recover the space occupied by the deleted Snapshot or Share asynchronously, and 
Share size may not immediately reflect available space from the operation.

Note: 

You cannot delete the latest Snapshot. Also, a Snapshot cannot be deleted while a restore is in progress.

Enabling long-term retention

AltaVault supports up to 500 SnapMirror shares in one of two modes: short-term retention (default) or long-term 
retention. For short-term retention, each share supports up to 251 Snapshots, and Snapshot retention is dependent upon 
the retention policy set up in ONTAP. For example, suppose a share has a two-tier retention policy supporting 50 hourly 
and 100 daily Snapshots. In this case, when the count of hourly Snapshots exceeds 50 or the daily count exceeds 100, 
the oldest snapshot of the respective tier is deleted. 

For long-term retention, each share supports up to a maximum of 3700 Snapshots, which is equivalent to 10 years 
worth of daily Snapshots. Long-term retention allows AltaVault to continue storing Snapshots until it reaches the 
maximum. If a share exceeds 3700 Snapshots, AltaVault begins deleting the oldest Snapshot copies to make room for 
new ones.

When long-term retention is turned off (disabled), AltaVault reverts to using the retention policy set up in ONTAP, 
which supports a maximum 251 Snapshots per share. If there are large numbers of Snapshots (more than 251) when 
long-term retention is turned off, the number of snapshots will be reduced to match the count set in the retention policy.

The retention method used for Snapshot retention applies to all SnapMirror shares created on the AltaVault.

To enable long-term retention mode

1.

Under Long Term Retention, click 

Enable

.

Field

Description

Name

List Snapshot for a share. Snapshot backups can be triggered in ONTAP through 

SnapMirror policies, by explicitly running the ONTAP update command, or through 
SnapCenter software. 

UUID

Lists the unique identifier associated with each Snapshot copy. The UUID value is 
generated by ONTAP. 

Created

Displays the date and time when the Snapshot was created in ONTAP.

Size

Specifies the size of a Snapshot. 

During the lifetime of a share, there is only one baseline Snapshot. Any Snapshot after 
the baseline is always incremental. Baseline transfer can take a long time to complete 

depending on the size of the Snapshot. 

During incremental Snapshot backups, only the changed blocks between two Snapshots 
are transferred.

Status

Identifies the status of Snapshot replication to the cloud. Replication status can be either 
Completed or Pending.

Содержание AltaVault AVA400





















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды