NetApp AltaVault AVA400 Скачать руководство пользователя страница 22

Страница: 22 / 276

NetApp AltaVault Cloud Integrated Storage Administration Guide

Beta Draft

Using the AltaVault configuration wizards

Using the Wizard Dashboard

Click

Next

to display the Confirmation page.

Click

Save and Apply

to display the System Settings Wizard Finish page.

Click

Exit

to close the System Settings Wizard and go back to the dashboard.

Using the Cloud Settings wizard

Use the Cloud Settings wizard to configure cloud settings, licensing, and the encryption key.

To use the Cloud Settings wizard

From the management console, choose Configure > Setup Wizard.

Select Cloud Settings in the Wizard Dashboard.

Note:

Check that the datastore is empty. If the datastore is not empty, you cannot change the cloud provider, region, hostname, and

bucket name.

Under Provider, select and configure your preferred cloud service provider from the drop-down list:

Note:

If you are configuring a private cloud, see

“Customizing a private cloud” on page 32



Amazon Glacier - see

“Configuring Amazon Glacier storage” on page 24



Amazon S3 - see

“Configuring Amazon S3 storage” on page 26



AT&T Synaptic Storage - see

“Configuring Atmos-based storage” on page 26



Cleversafe Cloud Storage - see

“Configuring S3-based storage” on page 30



Cloudian Cloud Storage - see

“Configuring S3-based storage” on page 30



Cloudwatt Object Storage - see

“Configuring SWIFT-based storage” on page 30



Dunkel Cloud Storage - see

“Configuring S3-based storage” on page 30



EMC Atmos- see

“Configuring Atmos-based storage” on page 26

Specify IPv4 Address Manually

Specify this option if you do not use a DHCP server to set the IP address. Specify the
following settings:

• IPv4 Address

Specify an IPv4 address.

• IPv4 Subnet Mask

Specify an IPv4 subnet mask.

• Default IPv4 Gateway

Specify the default primary gateway IPv4 address. The

primary gateway must be in the same network as the primary interface. You must set
the primary gateway for interface configurations.

Time Zone

Specify the country and time zone in which the AltaVault is located.

Enable Analytics

Enabling this feature will send daily informational AutoSupport (ASUP) messages to
NetApp.

Control

Description

Содержание AltaVault AVA400





















































































































































































































































































Результаты поиска

Содержание AltaVault AVA400

Отзывы:

Бренды по названию

Популярные бренды

NetApp AltaVault AVA400, Руководство администратора

Результаты поиска

Содержание AltaVault AVA400

Отзывы:

Бренды по названию

Популярные бренды