14
NET145LA/NET145CL User
’s Manual Rev1.0C
© 2004 NET GmbH. All rights reserved
(2) N_SHUT_SPEED
Controls Normal shutter speed
(3) GAIN
Gain can be set for the range value from 0 dB to +24 dB.
To set Gain value to +24 dB
[STX] [0] [6] [0] [F] [F] [ETX]
(4) OFFSET
The following are the control method for offset value
Offset Setting
[STX] [1] [3] [0] [X] [X] [ETX]
[X] [X] :[0] [0] ~ [F] [F]
When sets at initial factory default
[STX] [1] [3][1] [ETX]
(5) ALL RESET
All setting condition initialized.
[STX] [1] [4] [F] [EXT]
By this command, all setting conditions return to initial setting condition. Initial setting
condition means Factory setting condition.
(6) SAVE/ LOAD
Available memorized and call preset setting condition.
This command can memorize camera setting condition (max.6 modes) and possible to call.
The memory to Page-1 present setting condition
[STX] [F] [0] [0] [1] [ETX]
When call Page-2 (memorized setting condition)
[STX] [F] [0] [1] [1] [ETX]
(7) RETURN
The current camera setup data is sent from the camera to the terminal.
A.
Sending the setup data back to the camera.
[STX] [0] [1] [F] [ETX]
When the above command is accepted by the camera, the following command will
be transmitted continuously.
01F[ACK]05Y[ACK]04Y[ACK]06YY[ACK]0FX[ACK]130YY[ACK]
•
[ACK] : Acknowledge control code
•
X value is 0 or 1 and Y value is from 0 to 0xF