Net Safety VID-C, Руководство пользователя

Страница: 11 / 16

7
Installation Checklist
The following checklist is provided to check the system and confirm that all phases of system installation are
complete and have been performed correctly .
T
VID-C is securely mounted
T All wiring and cables are properly connected
T power source is operational
Start Up
With power applied, check that you are receiving a video signal on your VCR or video monitor.
Chapter 3 Troubleshooting
The VID-C is not designed to be repaired in the field. If a problem should develop, carefully check for correct
wiring. If it is determined that the problem is caused by an electronic defect, the device must be returned to the
factory for repair.
The unit is under full warranty for Two Years from the date of purchase.
Net Safety Monitoring Inc. supplies all distributors with advance replacement units. These units are available to
you during the warranty period. This allows Net Safety Monitoring Inc. time to repair your unit while you keep
your operations running smoothly.
Before returning devices or components, contact the nearest distributor so that an MRA (Material Return
Authorization) number can be assigned. A written statement describing the malfunction must accompany the
returned device or component to hasten finding the cause of the failure, thereby reducing the time and cost of the
repair to you. Use sufficient packing material in addition to an anti-static bag or aluminum-backed cardboard as
protection from electrostatic discharge.