Net Safety VID-C, Руководство пользователя

Страница: 6 / 16

2
Chapter 2 Installation and Start Up
What’s in the package
Remove all the components from the packing box(s) carefully; check components against the packing list. Inspect
all components for obvious damage and broken/loose parts. Notify the carrier and distributor immediately if
damage is found or parts are missing.
Location of Camera(s)
Proper location of the VID-C is essential for providing maximum coverage. The most effective placement and
numbers of cameras varies depending on the location. Experience, common sense, and knowledge of the area will
determine the number of cameras needed and the best locations to monitor the area adequately.
The following factors are important and should be considered for every installation:
<
The VID-C should be located where it is safe from potential sources of contamination i.e.
oil film, dirt.
<
The VID-C must be accessible for cleaning.
<
Exposure to excessive heat or vibration can cause premature failure of electronic devices
and should be avoided if possible.
Refer to figure 1 and 2 for installation information.