Net Optics iTap Port Aggregator, Руководство пользователя, Страница: 22 / 55

iTap Dual Port Aggregator
13
To set the iTap IP address:
1. Type set ip <ip address> where <ip address> is the IP address you are assign-
ing to the iTap and press Enter.
For example, typing
set ip 10.60.0.100 sets the iTap IP address to 10.60.0.100.
To set the utilization threshold levels:
Figure 8: Show Set Command Example
1. Type set threshold port a <level> where <level> is the percentage of the
available bandwidth at which the utilization alarm for Port A is triggered. Press
Enter.
For example, typing
set threshold port a 30 sets the alarm threshold level for
traffic received on Port A to 30%.
2. Type set threshold port b <level> where <level> is the percentage of the
available bandwidth at which the utilization alarm for Port B is triggered. Press
Enter.
For example, typing
set threshold port b 30 sets the alarm threshold level for
traffic received on Port B to 30%.
Tip! _____________________________________________________________________
You can set the utilization threshold levels at any time from the remote interfaces.
See Chapters 4 and 5 for more information.
__________________________________________________________________________