Net Optics iTap Port Aggregator, Руководство пользователя, Страница: 20 / 55

iTap Dual Port Aggregator
11
Configuring the iTap
The iTap is configured with default values that allow you to install the iTap and
then modify parameters from Web Manager or System Manager.
The defaults values are:
IP Address: 10.60.0.123
Netmask: 255.255.0.0
Threshold Port A: 50%
Threshold Port B: 50%
Port A: Gigabit
Port B: Gigabit
CLI username: netoptics
CLI password: netoptics
You can set all parameters, check status, and view statistics from the Command
Line Interface. You can change most settings later from one of the remote inter-
faces (for more information on remote interfaces, see Chapters 4 and 5).
Using the Command Line Interface (CLI)
All configuration options, status, and statistics are accessible from the iTap's
Command Line Interface. You must set a new username and password, IP address
for the iTap, utilization threshold levels for Port A and B, and the current date and
time. Other parameters are optional and dependent on your installation.
For security reasons, some parameters can only be set with the CLI.
Figure 7: Login and Password Prompts
Use these commands to:
Set CLI username and password
Enable or disable the remote interfaces and display
Turn character echo to the terminal emulation software on or off
You will find a complete list of CLI commands in Appendix B.
•
•
•