Net Optics iTap Port Aggregator, Руководство пользователя, Страница: 18 / 55

iTap Dual Port Aggregator
iTap Port Aggregator LEDs
Link Indicators: If a good link is established, the LED illuminates a steady
green.
Activity Indicators: If there is current activity on this link, the LED flashes.
Utilization Alarms A and B: These LEDs illuminate red when the threshold
utilization level exceeds the set threshold level. The Utilization Alarm LEDs
remain illuminated until reset with the Reset button or remotely reset via Web
Manager or System Manager.
PWR 1/ PWR 2 : Main and Redundant Power. If the iTap is deployed with
both power supplies, both LEDs illuminate when the iTap is connected to
power. An off power LED indicates that the corresponding power supply is
not functioning or not connected.
Changing the SFP Monitor Port Connector
You have the option to change the interface on the Monitor Port by changing
the small form-factor plug (SFP) on the Monitor Port. You can order conver-
sion kits which include the singlemode fiber, multimode fiber, GigaBit copper
SFP and appropriate cable from Net Optics. For ordering information, see
Specifications on page 42.
To change the SFP:
1. Turn off power to unit.
2. Remove the cable from the SFP on the Port Aggregator Tap.
3. Lower the wire clip to release the SFP connector.
4. With the clip on the lowered position, pull gently on the clip to free the
SFP.
5. Insert the new SFP until you hear it click into place.
6. Connect the cable supplied with the kit.
7. Power on unit.