Net.DO
Lighting Control Equipment Co.,Ltd
http://www.netdo.com.cn
FOX512 Moving Light Controller. PAGE: 24
9. Program
This chapter will introduce every function of program and how to edit program. 240 programs
(including “Single-Step-Program” & “Multi-Step Program”) can be recorded, in 30 pages, 8 programs
each page, and controlled by 10 playback faders.
Program Number (
xx.xx)
, the first number before dot is the page number, the second one after dot is
the playback number in that page (Correspond to playback faders).
PROGRAM menu tree:
9.1
HTP and LTP channel
HTP channel
(HIGHEST TAKES PRECEDENCE): ----- output the “highest value first”
This type of channel obeys the rule of “highest value first”, which means only the one with highest
value will be output if multiple playbacks control a HTP channel at the same time. Dimmer channel
must be HTP channel.
LTP channel
(LATEST TAKES PRECEDENCE): ----- output the “latest value first”
This type of channel obeys the rule of “latest value first”, which means the last started playback will
be output and kept until next one started if multiple playbacks control a LTP channel at the same
time. Channels such as Pan/Tilt, Gobo should be LTP channel normally.
9.2
Empty LTP channel
When the value of certain LTP channel in a program is empty (no value), this channel will be ignored
in playback.
For example:
Program1.01 only records Pan/Tilt while other channels are empty. Program1.02 only
records Colour with other channels empty. Then in playback, Program1.01 will only control
the moving while Program1.02 will only control the colour, they will not affect each other.
TIPS:
In editing programs, the attribute value which is unmodified manually will be empty, LCD will
display “
.
”. Press
CLEAR
to clear fixture value.
9.3
Clear LTP remaining value in Playback
In playback, LTP channel will be output by the way of “latest value first”, so even the playback fader
is pulled down and the program is closed, the value of LTP channel will remain. Sometimes, in order to
record a clean scene, the remaining value should be cleared.
Steps to clear remaining value are as follows:
Pull down all playback faders to close programs
Press
CLEAR
key to clear the value
PROGRAM
EditStep
（
F1
）
FadeSync
(F4)
FadeTime
(F3)
