Net.DO
Lighting Control Equipment Co.,Ltd
http://www.netdo.com.cn
FOX512 Moving Light Controller. PAGE: 14
Operation is as follows:
1) Enter FixPatch menu.
2) Press
Fixture Page Key
, then select a single fixture by
1~20 Numeric Key
3) Set the corresponding FixModel to the fixture;
(
Remark: “
000-dimmer
＊
” is for dimmable lights)
4) Set the corresponding DMX address to the fixture;
5) Repeat Steps 2~4 to patch other fixtures.
*TIPS1:
Select menu item by
Cursor Key
, modify contents by
Cursor Key
or
A/B Wheel
;
*TIPS2:
When the “
？
” appears next to the DMX addr, it means this DMX addr overlaps with other
fixture’s (The indicator of corresponding Fixture Numeric Key will flash slowly), the fixture
can’t be controlled unless a correct DMX addr is reassigned.
*TIPS3:
When the indicator of Fixture Numeric Key flashes fast, it means this fixture is selected.
When the indicator flashes slowly, it means the DMX addr of this fixture is not correct.
Skills of Fixture patch:
Copy
In FixPatch menu, the settings of a fixture can be copied to other fixtures by
COPY Key
,
the DMX addr will be automatically assigned sequentially. For example, to copy the
settings of fixture No.1 to No.2~10, the operation is as follows:
--- Press and hold
COPY
Press Fixture
Numeric Key 1
(source)
Sequentially press Fixture
Numeric Key 2~10
(target)
Delete
In FixPatch menu, the settings of a fixture can be deleted by
DEL Fix Soft Key.
Or by
DELETE Key
to delete settings of multiple fixtures, operation:
--- Press and hold
DELETE
Sequentially press Fixture
Numeric Key
(to delete multiple fixtures)
Check
--- Press and hold certain
Fixture Page Key
, if the indicators of certain Fixture
Numeric
Keys
are bright, it means the fixtures in that page is already patched.
Modify DMX addr
Selected fixtures with overlapping DMX addr can be reassigned a correct DMX addr by
Corre-Err Soft Key;
Automatically assign DMX addr
Press and hold
Corre-Err Soft Key
for 2 seconds to run AlignFix. The console will
automatically reassign DMX addr to all the fixtures from addr 001.
Fixture Channel Test
There are 2 libraries (
CH20/CH40)
in the console, which correspond to the fixtures of 20
or 40 channels. The sequence of the channels corresponds to the Attribute Faders’, for
convenience to test fixture channels without custom library.
