© EUROHEAT DISTRIBUTORS (H.B.S) LTD. Jan. 2011
Instructions Part Number IN1145 Ed A
23
Why Did You Fail?
Smokeless coal is generally a simple, trouble free fuel which lights easily, but slowly.
Before looking again at your lighting procedure examine the coal for evidence of
moisture. Many of the manufactured coals will absorb water and this will prevent the
coal from igniting or burning properly for a considerable time.
The Fire Went Out
If you are used to lighting a fire with “house coal” you will find smokeless coal needs
heating for a considerably longer time before it begins to burn. Disturbing the fire before
the coals are burning brightly will often take the parts of coal that have just ignited away
from the heat, allowing them to extinguish. If you have used firelighters it must be remembered that they are
petroleum based and have only flames to heat the coal. If coals are placed directly over them or the coals were
piled too high the vapours will burn above and, often seemingly detached from the fire bed, rather than under
the coals. Ensure that the air settings were correct because too high a draught will cause a similar effect. If the
fire was lit with wood it is probable that too much coal was placed on the fire, too soon.
See the above. Do not put too much coal on at one time and never turn the stove air volume down other than
by gradual increments. Do not add new a loading of coal if the previous loading is still producing significant
flames.
Ensure the air settings are adjusted correctly, riddle the fire before putting on new loadings of coal. Try and avoid
putting on new coal over any coals from a previous loading that have not ignited, or are still burning vigorously.
The Fire Never Developed Enough Size or Became Hot Enough
The Glass Blackened
TOO MUCH AIR THROUGH
THE GRATE
COALS TOO HIGH OR
SMOTHERING THE
FIRELIGHTERS
TOO MUCH COAL OVER THE
KINDLING
