background image

© EUROHEAT DISTRIBUTORS (H.B.S) LTD. Jan. 2011

    

 Instructions Part Number IN1145 Ed A

10

Ash Collection

The grate can be riddled to encourage ash to fall into the ash pan by locating the riddling tool in the extended 
connection shaft. Using a left to right action to cause the grate to oscillate. 

If  it  becomes  necessary  to  riddle  the  stove 
while it is operating, always riddle the stove 
before adding new fuel. 

As  well  as  being  used  to  re-arrange  the  fire  bed,  the  poker  is 
designed to be used for clearing ash through the grate slots and 
this will be found to be the most effective way of clearing wood ash when the fire has burned out. If the fire has 
been running on anthracite coal, and the stove has been over filled and under riddled, the poker may have to be 
used  to clear the grate of ash and partially burned coals.

Important

Do not allow the ash pan to over fill. This will cause ash to fall behind the ash pan as it is removed 
and can prevent the ash pan from fitting correctly. Over filling the ash pan can prevent under 
grate air reaching the fire which  can cause poor operation and damage to the grate.

Available Accessories

Euroheat offer a range of accessories which may assist with your day to day operation. These 
include fire tool sets for cleaner operation, log stores for storing wood and other items. Ask your 
euroheat retailer for the

 “Every Thing But The Stove Brochure” 

or visit the Euroheat web site. 

www.euroheat.co.uk

Ash Removal

Содержание Harmony 1





























Отзывы: