Ness SDI Скачать руководство пользователя страница 14

Страница: 14 / 61

Digital Video Recorder for Ness IQ-Series

1.5.11 USB Connections

There are up to four identical USB ports in front and in rear. It is possible to connect a USB memory stick to archive data or

a mouse to control the device.

1.5.12 RS-232 Connections

This port is not in use for users. Do not connect any devices

CAUTION

WHEN USING THE RS232 SERIAL PORT, USERS MUST REQUEST FOR ASSISTANT TO QUALIFIED TECHNICAL PERSON OR

SERVICE REPRESENTATIVE.

1.5.13 Grounding (Earthing)

Connection of ground wire is highly recommended to protect the DVR from external

electrical surge.

1.5.14 Factory Reset Switch

Reset the switch to restore all setup values of menus to factory default settings. It is also

Log file.

The switch is located in a pin hole of the back panel.

Put the clip pin into the switch hole on the monitor (Live) screen and keep pressing until the switch has clicked.

CAUTION

PRESS FACTORY RESET SWICH ONLY IN LIVE MODE

1.5.15 Power Supply connections

4 / 8 Channel:960H & 4 Channel SDI

to ’DC12V’ connector and plug another side to

Please do not use any different power supply adapter because it may cause the DVR to malfunction.

16 Channel 960h & 8 / 16 Channel SDI

to ’DC12V’ connector and plug another side to power source. Adapter input voltage is a free volt (100 VAC ~ 240 VAC).

Please do not use any different power supply adapter because it may cause the DVR to malfunction.

1.5.16 Connections Guideline

Video Out Connector: If only the monitor is connected to

rear side of the monitor to 75 ohms to prevent abnormally bright or collapsed images.

a recorder) to the back of the monitor, please set the impedance switch on the rear side of the monitor to

Impedance) and set the last device to 75 ohms.

Alarm Input Connector: Do not input any type of voltage to the AI 1~AI

Series 960H & SDI DVR

four identical USB ports in front and in rear. It is possible to connect a USB memory stick to archive data or

This port is not in use for users. Do not connect any devices through this port

HEN USING THE RS232 SERIAL PORT, USERS MUST REQUEST FOR ASSISTANT TO QUALIFIED TECHNICAL PERSON OR

Connection of ground wire is highly recommended to protect the DVR from external electric shock, such as lightening,

Reset the switch to restore all setup values of menus to factory default settings. It is also possible to use to initialize System

The switch is located in a pin hole of the back panel.

Put the clip pin into the switch hole on the monitor (Live) screen and keep pressing until the switch has clicked.

RESS FACTORY RESET SWICH ONLY IN LIVE MODE NEVER PRESS IN SETUP MODE.

Power Supply connections

960H & 4 Channel SDI

Plug the power supply adapter (DC 12V, 5A) which include in this product

’ connector and plug another side to power source. Adapter input voltage is a free volt (100 VAC ~ 240 VAC).

Please do not use any different power supply adapter because it may cause the DVR to malfunction.

960h & 8 / 16 Channel SDI

: Plug the power supply adapter (DC 12V, 6.67A)

’ connector and plug another side to power source. Adapter input voltage is a free volt (100 VAC ~ 240 VAC).

Please do not use any different power supply adapter because it may cause the DVR to malfunction.

If only the monitor is connected to VIDEO OUT connector, please set the impedance switch on the

rear side of the monitor to 75 ohms to prevent abnormally bright or collapsed images. If wish to connect another devi

a recorder) to the back of the monitor, please set the impedance switch on the rear side of the monitor to

Impedance) and set the last device to 75 ohms.

Do not input any type of voltage to the AI 1~AI4 (AI 16) connectors.

Page 14

four identical USB ports in front and in rear. It is possible to connect a USB memory stick to archive data or

HEN USING THE RS232 SERIAL PORT, USERS MUST REQUEST FOR ASSISTANT TO QUALIFIED TECHNICAL PERSON OR

c shock, such as lightening,

possible to use to initialize System

Put the clip pin into the switch hole on the monitor (Live) screen and keep pressing until the switch has clicked.

which include in this product

power source. Adapter input voltage is a free volt (100 VAC ~ 240 VAC).

Please do not use any different power supply adapter because it may cause the DVR to malfunction.

A) which include in this product

’ connector and plug another side to power source. Adapter input voltage is a free volt (100 VAC ~ 240 VAC).

Please do not use any different power supply adapter because it may cause the DVR to malfunction.

VIDEO OUT connector, please set the impedance switch on the

If wish to connect another device (e.g.,

a recorder) to the back of the monitor, please set the impedance switch on the rear side of the monitor to HIGH Z (High

Содержание SDI






























































Результаты поиска

Содержание SDI

Отзывы:

Похожие инструкции для SDI

Бренды по названию

Популярные бренды

Ness SDI, Руководство пользователя

Результаты поиска

Содержание SDI

Отзывы:

Похожие инструкции для SDI

Бренды по названию

Популярные бренды