Ness L-8, Руководство пользователя

Страница: 9 / 24

9
A R M I N G T H E C O N T R O L PA N E L
The control panel must be armed prior to
vacating the premises in order to detect
intruders. Ensure that the panel is not in
Program, Memory or Exclude modes.
N O T E :
If the panel is already in alarm,
you must first silence the alarm before you
can arm.
These are two methods of arming the panel:
1.
Normally the panel is armed by pressing
Arm then Enter.
2.
Your installer may have programmed the
panel to require the entry of a code to arm
the panel.
If something is wrong when Arming the
control panel, the normal 3 beeps will be
replaced by other warnings.
• Mains power is turned off
• Control Panel battery is low
• A long beep indicates an invalid entry
or an alarm is outstanding and needs
to be reset by entering your access
code first.
Siren Warning: At the end of the exit time,
all zones should be secured. If any are unse-
cured, the siren will sound for 2 seconds as
a warning to indicate that those zones have
been automatically excluded. For maximum
security, you should return, disarm, check
the premises and then arm again. Continual
warnings could mean that a detector is faulty
and may have to be manually excluded.
If the auto-exclude option is disabled, the
siren will sound for the duration of reset
time if a zone is unsecured at the end of exit
time.
1.
CHECK that all windows and doors are securely locked.
2.
P R E S S
or
code
3.
The arm light should be ON.
4.
L E AV E the premises within your exit delay time.
5.
At the end of the exit delay time, three beeps will sound
Arm
Arm
..Enter..
..Enter..