Ness L-8, Руководство пользователя

Страница: 14 / 24

14
E X C L U D I N G Z O N E S
If a detector becomes faulty and cannot be
secured when arming the panel, then its
zone may be excluded, ie.ignored by the
system so that it does not generate false
alarms.
To enter Exclude mode press,
<
Exclude
> <
Enter
>
or
<
Exclude
> <
code
> <
Enter
>
All the lights will be turned off and then
the Zone Excluded light will show a steady
light. You may now exclude zones.
To exclude, say, zones 4 and 8, press the
buttons…
<
Exclude
> <
Enter
>
4 <Enter> 8 <Enter>
Zone lights 4 and 8 will turn on.
<Enter> to Exit Exclude Mode
N O T E : Excluding zones can only be done
when the panel is disarmed.
1.
To exclude zones…
2.
Press…
or
code
the Exclude light should be On
3.
ENTER the zone/s to be EXCLUDED Zone No.
4.
To EXIT press ENTER
If you make a mistake, enter the zone number again to remove it from your selection.
Zones which you exclude will be indicated by the relevant zone light showing a steady light
in the exclude mode.
N O T E : Your Control Panel may be programmed to automatically exclude faulty zones
whenever you Arm. The Exclude light will flash as a warning or memory of the auto-exclusion.
If Auto - Exclude is selected the outside Siren will sound for 2 seconds indicating a zone has
Auto Excluded.
Exclude ..Enter..
..Enter.. Exclude
..Enter..
..Enter..