Ness L-8, Руководство пользователя

Страница: 8 / 24

8
O P E R AT I O N
This section describes the operation of a typ-
ical control panel installation. Keep in mind
that your installation may vary depending
on the selected options and equipment. The
operating instructions which follow will endea-
vour to cover the most common options. If
you had any doubts speak to your installer.
All control panel operations are controlled
by the L8 keypad except if an optional key
switch or radio control is installed.
O P E R AT I N G R U L E S
Generally, the panel will be in the disarmed.
Armed or monitor modes which provide
different levels of security for your prem-
ises. Three other temporary modes, program,
memory and exclude, allow you to perform
various operations. The panel will automati-
cally exit from these temporary modes if
you do not press any buttons on the keypad
within a 4 minute period.
If you make a mistake while entering any
codes, press the enter button and start again.
When you are required to enter your access
code, you are given three opportunities to
enter it correctly. After the third invalid
attempt the alarm is activated (requiring the
correct code to silence the alarm). This prevents
anyone trying to guess your code by enter-
ing random numbers.
A R E A O P E R AT I O N
The L8 control panel allows for the 8 zones
to be split into two groups known as area 1
and area 2.The two areas can be assigned
access codes so that a user may have access
either of the areas or both areas. This allows
for people to have access to one part of
your premises while the other part remains
armed.
This is known as area operation. Arming and
disarming is carried out as normal, you may
have keypads installed in each area and set
up by your installer so that the armed light
indicates the armed state for that area only.
N O T E :
All zones which are active in the
armed mode always exist in one or both
areas, eg. even if you do not require your
8 zones to be split, all 8 zones will be
programmed to operate in area 1.