NESS ID TECK Finger007, Руководство пользователя

Страница: 37 / 61

101-092 37 FINGER007 – Version 4.0
IDTeck – FINGER007 FINGERPRINT & PROXIMITY READER
9.2.1 REGISTERING AND CHANGING TIME SCHEDULE
TIM E SCHEDULE DISPLAY CURRENT T/S
SELECT T/S NUM BER AND INDEX
(USE "2","8","4","6"KEY)
ENTER T/S (8 DIGIT)
(START TIM E(hh:mm) - END TIM E(hh:mm))
'ENT'
'ENT'
COM PLETION
YES
'ESC'
NO
☞
. Press <2> key or <8> key to adjust the Time Schedule (T/S) number (1-
10) and the day of the week (Mon-Sun and ‘HOL’). Define which shift of
the day (1-5), using the <4> key and <6> key. ‘HOL’ refers to specific
holidays you will register. Press <ENT> key, and the cursor will blink,
then enter the beginning time of the period, in the form of hour(2-
digit):minute(2-digit) and the ending time in the same form. Then the
lower line will indicate the defined period. For more schedules, repeat
the process. To end time scheduling, press
<ESC> key.
☞.
You may program time schedules to grant and restrict access for each
user. There can be up to ten different schedules. A minimum of one
schedule must be defined.
If only one schedule is programmed the most common setting allows
access for all users 24 hours / day. A time schedule can be programmed
for each day of the week and holidays, and five shifts can be defined for
each day. To set time schedules, press <ENT> key from this menu.
If you want to set time schedules, press <ENT> key when this figure is
displayed.
T/S : 01 HOL : 1
TIME SCHEDULE
. Possible values for time scheduling
1) Time schedule number : 01 ~ 10 (Needed when IDs are registered)
2) A day of the week : MON, TUE, WED, THU, FRI, SAT, SUN, HOL
3) Index : 1 ~ 5(referred to the five periods of time of a day)