Neptune 13458-000, Руководство по установке и обслуживанию

Страница: 82 / 150

Figure 88 – RJ45 Ethernet Plug
3. Assemble the Ethernet plug according to the instructions
included. See Figure 88.
Figure 89 – Ethernet Plug Terminated
4. Terminate the Ethernet jack to the Ethernet cable.
See Figure 89. Refer to "Ethernet Termination" on
page 114 of Appendix D.
Figure 90 – Ethernet Plug Inserted
5. Insert the Ethernet plug into the Ethernet receptacle on
the Gateway.
6. Screw the entire Ethernet plug assembly into the
RJ45 Ethernet housing which is already mounted at the
bottom of the Gateway.
7. Tighten the cable fitting until the gasket is tight around
the RJ45 cable. See Figure 90.
The Ethernet connector is weatherproof (IP67 rated) and does
not require weatherization wrap.
Configuring the Gateway
See "Mounting the Gateway - Solar Configuration" on page 32.
64 R900 Gateway Installation and Maintenance Guide
Chapter 4: Installation of the Gateway