Neousys Nuvo-7160GC Series Скачать руководство пользователя страница 97

Страница: 97 / 159

Nuvo-7160GC/ Nuvo-7164GC Series

3.7.2

Powering On Using External Non-latched Switch

If your application demands the system to be placed inside a cabinet, you may use an external

non-latched switch to power on/ off the system. The system provides a 3-pin “Remote On/ Off”

plug for connecting a non-latched switch and acts as the ATX-mode power on/off control

switch. The external non-latched switch acts exactly the same as the power button on the front

panel. To setup and power on/ off the system using an external non-latched switch

(ATX-mode), please follow the steps described below.

Acquire a non-latched switch with 3-pin plug.

Connect the non-latched switch to the Remote On/ Off 3-pin plug.

With DC power connected, pushing the power button will turn on the system and the

PWR LED indicator will light up. Pushing the button when system is on will turn off the

system. If your operating system supports ATX power mode (i.e. Microsoft Windows or

Linux), pushing the power button while the system is in operation will result in a

pre-defined system behavior, such as shutdown or hibernation.

Содержание Nuvo-7160GC Series
































































































































































Результаты поиска

Содержание Nuvo-7160GC Series

Отзывы:

Бренды по названию

Популярные бренды

Neousys Nuvo-7160GC Series, Руководство пользователя

Результаты поиска

Содержание Nuvo-7160GC Series

Отзывы:

Бренды по названию

Популярные бренды