Neousys Nuvo-7160GC Series Скачать руководство пользователя страница 95

Страница: 95 / 159

Nuvo-7160GC/ Nuvo-7164GC Series

3.6.2

Anti-vibration Damping Bracket Installation (Optional)

NOTE

You will need to remove the four (4) rubber stands at the bottom of the enclosure if they have

been attached.

The optional patented anti-vibration damping bracket offers superior operating vibration

resistance up to 1Grm with HDD or up to 5Grm with SSD. To install the bracket, please refer to

the following installation procedure.

Take out anti-vibration damping bracket, eight (8) M4 screws and eight (8) sleeves from

the accessory box. Insert the M4 screws into the sleeves and through the anti-vibration

grommets to secure the system to the bracket; and the bracket to a flat surface.

The damping bracket performs best when the system is installed horizontally.

Содержание Nuvo-7160GC Series
































































































































































Результаты поиска

Содержание Nuvo-7160GC Series

Отзывы:

Бренды по названию

Популярные бренды

Neousys Nuvo-7160GC Series, Руководство пользователя

Результаты поиска

Содержание Nuvo-7160GC Series

Отзывы:

Бренды по названию

Популярные бренды