Neousys Nuvo-7160GC Series Скачать руководство пользователя страница 51

Страница: 51 / 159

Nuvo-7160GC/ Nuvo-7164GC Series

System Installation

Before disassembling the system enclosure and installing components and modules, please

make sure you have done the following:



It is recommended that only qualified service personnel should install and service this

product to avoid injury or damage to the system.



Please observe all ESD procedures at all times to avoid damaging the equipment.



Before disassembling your system, please make sure the system has powered off, all

cables and antennae (power, video, data, etc.) are disconnected.



Place the system on a flat and sturdy surface (remove from mounts or out of server

cabinets) before proceeding with the installation/ replacement procedure.

Содержание Nuvo-7160GC Series
































































































































































Результаты поиска

Содержание Nuvo-7160GC Series

Отзывы:

Бренды по названию

Популярные бренды

Neousys Nuvo-7160GC Series, Руководство пользователя

Результаты поиска

Содержание Nuvo-7160GC Series

Отзывы:

Бренды по названию

Популярные бренды