Neousys Nuvo-7160GC Series, Руководство пользователя

Страница: 120 / 159

Nuvo-7160GC/ Nuvo-7164GC Series
120
4.1.14 Watchdog Timer for Booting
The watchdog timer secures the boot process by means of a timer. Once the timer expires, a
reset command is issued to initiate another booting process. There are two options in BIOS
menu, “ Automatically after POST ” and “ Manually after Entering OS ”. When “ Automatically
after POST ” is selected, the BIOS automatically stops the watchdog timer after POST
(Power-On Self Test) OK. When “ Manually after Entering OS ” is selected, the user must stop
the watchdog timer once booted into the OS. This guarantees the system can always boot into
the OS, otherwise another booting process will be initiated. For information about
programming watchdog timer, please refer to Watchdog Timer & Isolated DIO .
To set the watchdog timer for boot in BIOS:
1.
When system boots up, press F2 to enter BIOS setup utility.
2. Go to [Boot] menu.
3.
Disable or select timeout value for [WDT for Booting] option.
4.
Once you give a timeout value, the [WDT Stop Option] option appears. You can select
“Automatically after POST” or “Manually after Entering OS” .
5.
Press F10 to “Exit Saving Changes.