Nuvo-5095GC Series User’s Manual
Copyright © 2017 Neousys Technolgy Inc. All Right Reserved.
48
3.2.2 Replace the CPU on Nuvo-5095GC
For a Nuvo-5095GC system with CPU installed, please follow steps described below to
replace the CPU on it.
Caution
1.
Please make sure the PCBA/heat-sink assembly is cooled down to room temperature before
you proceed with the installation/replacement procedures. Replacing the CPU at high
temperature may damage the system.
2.
Please carefully handle the exposed LGA socket on PCBA. The contacts of LGA1151 socket
without protective cover are extremely easy to be damaged by foreign objects. You shall
always put the protective cover back to the LGA socket when CPU is absent.
1. Follow steps described in section 3.1 to disassemble the Nuvo-5095GC controller.
2. Remove the PCBA from the heat-sink by loosing five M3 spring screws (red circles)
and six M3 P-head (yellow circles).
