31
10. Push the “FEEDER READY” lever on the operator side of the delivery table forward toward the printer. This
will trigger the manual feed tray paper present sensor so the printer knows you have envelopes in place.
At this point, you are now ready to send data to the printer. Once data has been sent, the manual feed tray will
rise, lifting the patented floating delivery table up to the printer’s feed roller.
IMPORTANT NOTES
The printer will only recognize that the feeder is ready (paper present) if the “Feeder Ready” lever has been
pushed forward. You also need to insure that the envelopes have been advanced down the delivery table, to
the stop photo sensor, before you begin printing.
If you want to pause printing
, simply move the “Feeder Ready” Lever back (right) and the printer will consider this
an envelope out condition. The printer display will indicate that you need to “install paper” in the manual
(bypass) feed tray. When you are ready to resume printing, simply move the “Feeder Ready” lever back to the left
(forward) and the printer will resume operation.
When you lift the delivery table up to remove the feeder from the printer, or to move the feeder into position
with the printer, the Feeder Ready lever will automatically be moved to the right. This gives the operator ample
opportunity to advance envelopes properly into the printer before moving the lever forward, indicating a ready
state to the printer.
FEEDER READY LEVER
Push this lever forward to begin printing
after advancing envelopes.
Feeder Ready lever
Left to run, right to stop
