12
Step 8.
When the stand height is adjusted properly, push the feeder all the way in until it stops.
AS YOU PUSH THE FEEDER INTO POSITION, A LATCHING MECHANISM UNDERNEATH THE DELIVERY TABLE
SECURES THE FEEDER TO THE PRINTER. YOU WILL HEAR THIS MECHANISM SNAP INTO PLACE AS YOU MOVE
THE FEEDER IN.
Step 9.
After the stand height has been properly set so the feeder latches into position, tighten the locking
levers on both legs of the stand securely. You may now detach the feeder from the printer to set up your
envelopes
THE FEEDER IS EQUIPPED WITH A RELEASE LEVER ON THE NON-OPERATOR SIDE THAT ALLOWS IT TO BE EASILY
DETACHED FROM THE PRINTER.
Step 10.
To detach the feeder from the printer, pull the release lever back towards the feeder and carefully
pull the feeder away from the printer.
MOVE THE FEEDER AWAY SLOWLY AND SUPPORT THE DELIVERY TABLE
OF THE FEEDER SO IT DOES NOT DROP ABRUPTLY WHEN IT EXITS THE MANUAL FEED TRAY!
Side plates should be against the
printer here.
Support the table here so that it
does not drop abruptly!
