Neopost AS-940 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 50

Neopost AS-940 Скачать руководство пользователя страница 29

4. While watching the printer status in the “Printers” folder; power the printer

off, wait 10 seconds, and power the printer on.

Tip: To display the printer “status” column in the “Printers” folder; click on

“view” and then select “details”.

The printer status should toggle from “offline” to “ready” when you
power the printer on.

The status should toggle from “ready” to “offline” when you power the

printer off.

IMPORTANT! You may need to repeat this step (power printer off/on)

more than once, for the system to recognize the printer and to see the

status change.

5. If the printer status does NOT change, when you power the printer off and

on; click on the “Ports” tab, then locate and select the next USB port

selection in the list.

Then click on Apply.

6. Go to Step # 4.

7. If the printer status changes when you power the printer off/on then close

the printer driver’s properties window by clicking on OK.

8. You are Finished.

Your printer driver has been properly configured for the USB port you are

connected to and the driver is communicating with printer.

You are ready to begin printing.

SECTION 3
OPERATING THE PRINTER

© 2009 Neopost USA Inc. All rights reserved.

29

«
...
27
28
29
30
31
...
»

Содержание AS-940



















































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды