Neomatica ADM333 BLE, Руководство по эксплуатации

Страница: 37 / 48

Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019
37
Command Answer Parameters Description
16 PROTOCOL X PROTOCOL X X
– number determining a
data set to be transmitted
Configure the set of data to be transmitted
to the server. (detailed description see in
clause 5.5 Setting data transmission )
17 BMODE X BMODE X X=0
– mode "Тracker".
X=1
– mode "Beacon".
Choose the tracker working mode (mode
of points record)
18 TRAFFIC X TRAFFIC X X=0..60- time in seconds.
By default is X=6
Set the delaying time before sending a
packet to the server for points grouping.
19 ERASE FLASH ERASE FLASH Command without
parameters
Erase all information packets stored in the
memory. After executing this command, the
current information packet number is reset,
the tracker is rebooted.
20 ERASE EEPROM ERASE EEPROM Command without
parameters
Restore the tracker factory settings and restart
the tracker.
21 PERIOD X,Y
Example:
PERIOD 20,120
PERIOD min=X, max=Y
Example:
PERIOD min=20, max=120
X
– the recording period
during the movement in
seconds, default X=30.
Y
– the recording period
during parking in seconds,
by default Y=300.The value
of X must be less than Y.
Set the recording period of information
packets during driving and parking.
A command without parameters returns
current settings.