Neomatica ADM333 BLE, Руководство по эксплуатации

Страница: 30 / 48

Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019
30
Use 2 formulas to calculate two ranges of incoming values:
For the range values from 0 to 32767
– apply formula X*0.01
For the range values from 32768 to 65535 - apply formula X*0.01-655.36
To display negative and positive values correctly use both formulas for the corresponding
ranges.
Acceptable values range after formula calculation is -
39…+150
-300 value (after formula calculation) is considered as an error code
«no signal from sensor».
•
Humidity level
Conversion is not needed.
Acceptable values range 0
– 100
255 value is considered as an error code
«no signal from sensor».
•
illumination level
⎯
Shortened format (by default).
There is no need for conversion in case of using a shortened format.
Acceptable values range is 0
– 65534.
65535 value is considered as an error code
«no signal from sensor».
⎯
Full format.
When using a full format apply formula X*0.01.
Acceptable values range after calculations is 0.00
– 83866.00
42949672.95 value (after formula calculation) is considered as an error code
«no signal from
sensor
».
Setting the format of illumination level transmission is described in clause 7.3 Selecting the
transmission format of the illumination level .
•
Battery voltage
Apply formula X*0.1.
Acceptable values range after calculations is 0
– 4
25.5 value (after formula calculation) is considered as an error code
«no signal from sensor».
•
Hall sensor (magnetic field detector)
Conversion is not needed.
Acceptable values range is 0
– 1.