© 2022 by NeoLight LLC.
All rights reserved.
Page 30 of 43
500050 Rev A
3.
Fold the power cord half 3
times and use a wire tie to
secure it. Then place it in
the slot shown.
4.
Do not unplug the
Controller from the
Lightbed. Instead, hold the
Power-box and Controller
close to each other and
fold the cable connecting
them in half 2 times. Use a
wire tie to secure it
5.
Place the assembly into
the slot as shown below.
Note that the Controller
and Lightbed are still
connected. Then, start
tucking the cable
connecting the Lightbed
and Controller into the
slot as shown. You will
have to hold the Lightbed
very close to the case
while performing this step
6.
Gently place the Skylife
unit on the foam as
shown, close the lid, and
secure with latches/lock.
4.8 Homecare Providers
Ensure when you deliver Skylife for use in the home that you provide adequate in-service training for
parents or guardians. Be sure to provide all the Instructions for Use, Quick Reference Guides, Skylife
Disposable Swaddles, and eye covers.
