background image

Questions? Call us at 800/621-8829 or 859/254-1221

 

8

Questions? Call us at 800/621-8829 or 859/254-1221

 

9

Preparation

Neogen recommends operators familiarize themselves with the operation of the manual 
control prior to using ElectroJac 6’s manual setting. To accomplish this, do the following:
1.  Connect only the dwell cable to the electronics instrument case. Make sure the 

On/off 

switch on the dwell control box is 

Off

.

2.  Set the 

Auto/manual

 switch on the electronics instrument case to 

Manual

3.  Set the 

Manual

 control on the electronics instrument case to 

Low

NOTE

: Always make 

sure the manual control is in 

Low

 before turning the unit on.

4.  Set the 

On/off 

switch on the dwell control box to 

On

.

5.  While observing the blinking numeric display, very slowly turn the manual control 

clockwise. Notice when the numerals on the display start to increment. This is the start 
of stimulation. Practice this several times before using on an animal.

Operation

1.  To protect the unit and the animal, ElectroJac 6 must be prepared for use prior to 

beginning the operation. To prepare the unit: 
a.  Set the 

Auto/manual

 switch on the electronics instrument case to 

Manual

b.   Set the 

On/off

 switch on the dwell control box to 

Off

c.   Set the 

Manual

 control on the electronics instrument case to 

Low

.

d.  Plug one end of the probe cable to the electronics instrument case in the port 

marked 

Probe

 (on the case’s right side) and the other end to the probe.

e.   Plug the dwell cable to the electronics instru-

ment case into the port marked 

Dwell

 (on the 

case’s left side).

 

2.  Once the animal is prepared for collection, insert the 

probe into the animal’s rectum with the three brass 
electrodes facing down.

3.  After the probe is in place, set the 

On/off

 switch on 

the dwell control box to 

On

. Slowly manipulate the 

manual control clockwise then counterclockwise until 
ejaculation.

4.  After use, wipe the probe and cables down with a 

sponge and a nontoxic, nonabrasive cleaning  
solution.

 

NOTE

: The manual control 

must be in the low position 
prior to beginning manual 
operation.

Manual operation with optional dwell cable

NOTE:

 Optional accessory (not included in the complete set)

Содержание Electro Jac 6

















Отзывы: