PROTON IP QW ZOOM
P. 11
ENGLISH VERSION
• Set the colors R , G , B, W, GB, RB, RG, ,RGB, RW, GW, BW,
RGW, RBW, GBW, RGBW, through the buttons
UP/DOWN,
then press the button
ENTER
.
• Press the
MENU
button to go back or to meet the waiting
time to exit the setup menu.
Manual mode
This mode allows to combine the colors red, green, blue
and white (R, G, B, W).
• Press the button
MENU
so many times until the display
shows Static, then press the button
ENTER
. • Select Man-
ual Color through the buttons
UP/DOWN,
then press the
button
ENTER.
• Select the color R, G, B, W through the buttons
UP/
DOWN,
then press the button
ENTER.
• Using
UP/DOWN
button, select the desired color value 000 - 255.
• Press
ENTER
button to continue to the next color R, G, B,. W.
• Continue until the desired mix is obtained.
• Press the
MENU
button to go back to the main menu.
Master/slave mode
This mode will allow you to link up the units together with-
out a controller. Choose a unit to function as the Master.
The unit must be the firast unit in line; other units will work
as slave.
• Use standard DMX cables to daisy chain your units to-
gether via the DMX connector on the rear of the units. For
longer cable runs we suggest a terminator at the last fixture.
• Set on master fixture the desired program.
• Set the slaves to the same DMX modes.
Linkung
• Connect the DMX OUT of the master unit via 5-pin XLR
cable to the DMX IN of the first slave unit.
• Connect the DMX OUT of the first slave unit to the DMX
