PROTON IP QW ZOOM
P. 7
ENGLISH VERSION
MOUNTING
PROTON IP QW ZOOM
may be set up on a solid and even
surface. The unit can also be mounted upside down to a cross
arm. For fixing, stable mounting clips are required. The mount-
ing place must be of sufficient stability and be able to support a
weight of 10 times of the unit’s weight.
When carrying out any installation, always comply scrupulous-
ly with all the regulations (particularly regarding safety) cur-
rently in force in the country in which the fixture’s being used.
• Install the projector at a suitable location by
means of the mounting bracket (1).
• Always additionally secure the projector with the
safety rope from falling down. For this purpose, fas-
-ten the safety rope at a suitable position so that
the maximum fall of the projector will be 20 cm.
• Adjust the projector and use the screw to slightly
release or tighten the locking mechanism of the
bracket if it’s necessary.