NEO TOOLS 90-039, Руководство пользователя

Страница: 6 / 48

13. The heater must not be located immediately below a wall
socket.
14. Do not connect the fan heater using an on/off timer or other
equipment which can automatically switch the device on.
15. The heater must not be placed in rooms where flammable
liquids or gases are used or stored.
16. If an extension cord is used, it must be as short as possible and
always be fully extended.
17. Do not use this heater in the immediate surroundings of a bath,
a shower or a swimming pool.
18. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
19. You must not connect other appliances to the same mains
socket as the fan heater.
20. Make sure heater is always under surveillance and keep
children and animals away from it;
21.
When you don’t use the appliance for a long time, unplug the
appliance. Don’t leave the heater for a considerable amount of
time when in use. Pull the plug straight out, never remove the
plug by pulling on the cord.
22. Keep the heater far from curtain or places where the air inlet can
easily be blocked.
23. Parts of the heater may exceed 200
℃
, contact with the heating
tube, reflector, or mental parts near the heating tube, may cause
severe burns . To avoid burns, do not let bare skin touch hot
surface.
24. Always allow heating element to cool at least 10 minutes before
touching the heating tube or adjacent part
25. In order to prevent possible electric shock or leakage current,
never use the appliance with wet hand or operate the appliance
when there is water on the power cord.
26. Do not dispose of electrical appliances as unsorted municipal
waste, use separate collection facilities. Contact your local
government for information regarding the collection systems
available. If electrical appliance are disposed of in landfills or
dumps, hazardous substances can leak into the groundwater
and get into the food chain, damaging your health and well-
being.
27. This appliance is not intended for use by persons (including
children) with reduces physical, sensory or mental capabilities
or lack of experience and knowledge unless they have been
given supervision or instruction concerning the use of the
appliance by a person responsible for their safety.
28. Children should be supervised to ensure that they do not play
with the appliance.
TECHNIACAL SPECIFICATIONS
Model 90-039
Waterproof class IP 55
Voltage 230V ~
Required power 2000W
Current 8,7A
Required fuse 10A
Setting 2000W
Self-resetting thermostat Yes
Heating area 16-20 m2
Max. lighting time 10000 h
Dimensions (mm) 900x130x89,5
Weight (kg) 3,0
INTRODUCTION
The infrared heaters produce instant and comfortable heat like the
sun. These robust and weatherproof heaters are designed for
domestic and commercial heating applications within indoor and
outdoor areas.
ASSEMBLY INSTRUCTIONS
1 Bracket L Shape 4 PCS
2 Screw M6x60 4 PCS
3 Nut M6 2 PCS
4 Gasket
⌀
6mm x 1mm 2 PCS.
5 Screw M6x12 2 PCS
INSTALLATION
Tools needed: pencil, hammer, level, screw driver, power drill
and drill bits.
The radiator should not be mounted directly on the wall
The enclosed brackets are used for the correct installation of
the radiator. Keep the power cord away from elements that get
hot.