NEO TOOLS 90-036 Скачать руководство пользователя страница 6

Страница: 6 / 45

Power cord and Power plug connection

1. Inset two cable connector in right direction
2. Tightly screw
3. Make sure two cable connect well

Note: The heater has a 45-degree tip over angle function. If the
heater tips over more than 45-degree angle, the heater will be
automatically shut off.

WARNING: Ensure that the supply cables are well mounted and

that it does not come in contact with the reﬂe

ctor of the heater

or that it does not trail into a heated area.

WARNING: Place on a flat, stable surface when used

In order to stabilize

the radiator, it is recommended to screw it to the base.

Switch instruction

O: Power ON/OFF
I: 50% power
II:100% Power

Caution:

When the appliance is not operated for a long period of time,

cleaning or maintenance is conducted or when the
location of the heater is changed, the heater should
be turned to OFF and unplugged from the electrical
connection.

Periodic inspection and removal of dirt and

contaminants will ensure that equipment can be operated
safely.

CLEANING AND MAINTANCE

Regular and careful cleaning helps your infrared heater operate
efficiently for many trouble free years. To clean your heater follow
steps below:
1.

Unplug the power cord.

Make sure the heater is cool before continuing

To keep the heater clean, the outer shell maybe cleaned with a
soft, damp cloth. You may use a mild detergent if necessary.
After cleaning, dry the unit with a soft cloth. (Caution: Do not let
liquids enter the heater)

Do not use alcohol, gasoline, abrasive powders, furniture polish
or rough brushes to clean the heater. This may cause damage
or deterioration to the surface of the heater.

Do not immerse the heater in water

Wait until the heater is completely dry before use.

Storage: Store the heater in a cool, dry location when not in use to
prevent dust and dirt build up. Use packaging carton to store.

Troubleshooting

1. Check if the power cord is plugged into an electrical outlet, if not,
plug in.
2. Check if electricity to the main fuse is working.
3. Check if the power switch is turned on.

ATTENTION:

1.Always disconnect the heater from the electricity supply and allow
it to cool before attempting to work on it.
2.If the heater has collected dust or dirt inside the unit or around the
heating element, have to unit cleaned by a qualified service agent.
Do not operate the heater in this condition.
3.The only maintenance required is cleaning of the external surfaces
of the heater.
4.Do not touch the heating element with bare fingers, as residue from
your hand could affect the life of the lamp. If it is accidentally touched,
remove the finger marks with a soft cloth moistened with mentholated
spirit or alcohol.
5.Do not attempt to repair or adjust any electrical or mechanical
functions on this heater.
6.The heater contains no user serviceable parts. Should the product
suffer damage or breakdown, it must be returned to the manufacturer
or its service agent.
7.Damaged supply cords to be replaced by the manufacturer, service
agent or similarly qualified person in order to avoid hazard.

RECYCLING

Electrical equipment must not be disposed of household waste and,
instead,  should  be  utilized  at  appropriate  facilities.  Information  on
utilization  can  be  provided  by  the  product  vendor  or  the  local
authorities.  Waste  electrical  and  electronic  equipment  contains
substances  that  are  not  neutral  to  the  natural  environment.
Equipment that is not recycled constitutes a potential hazard to the
environment and to human health.

ÜBERSETZUNG DER ORIGINALANLEITUNG

INFRAROTHEIZUNG

90-036

HINWEIS: BEVOR SIE DAS GERÄT ZUM ERSTEN MAL

VERWENDEN, LESEN SIE DIESE BEDIENUNGSANLEITUNG UND

BEWAHREN

SIE

FÜR

ZUKÜNFTIGE

VERWEISE

AUF. MENSCHEN, DIE DIESE ANWEISUNG NICHT GELESEN

HABEN, DÜRFEN DAS GERÄT NICHT ZUSAMMENBAUEN,