6
USING YOUR MASTER KEYPAD
Global Commands
Global Commands are commands from the Master keypad which the Master
and the Slave Energizer must obey simultaneously.
All energizers in the network to obey the commands. The status quo of the
individual energizers is assumed to be that of the master when issuing a
global command
.
Example:
If a four energizer system with one individual slave in the Off
state. The master and other two slaves are in the On state. Issuing a global
On/Off toggle command will result in all the energizers being in the Off state
because the Master had been in
the On state.
ON / OFF TOGGLE (All units)
Enter the Master PIN and press #. All the units should either be on or off.
Verification of all units being in the ON state is if the GOOD indicator is
permanently lit. Verification that all units are in the OFF state is if the ON
indicator is not lit or not flashing. Repeat the sequence if the desired state
has not been attained
.
HIGH/LOW VOLTAGE TOGGLE (All units)
Enter the Master PIN and press *3#. All the units should toggle between
High-Voltage and Low-Voltage or vice versa. Verification that all units are in
the High-Voltage state is if the ON indicator is permanently lit. Repeat the
sequence if the desired state has not been attained. If the ON indicator
remains flashing after ten seconds repeat the sequence
.
MERLIN STEALTH
MASTER
Using your MASTER KEYPAD
