Nemtek Druid LCD 20, Руководство пользователя

Страница: 12 / 17

FENCE ALARM BYPASS _ _ _ _ * 2 1 # (alarm bypassed)
_ _ _ _ * 2 0 # (alarm not bypassed)
Use this feature to prevent the alarm from sounding when a fence fault occurs. Typically
you would not want to bypass the fence alarm, however this feature is available should it
be needed.
If the fence alarm is bypassed, the symbol under the
ALARM label on the keypad will
be lit and on the unit’s LCD, the symbol linked to the FENCE ALARM label will be
shown.
SILENT ALARM _ _ _ _ * 8 1 # (siren and strobe are bypassed)
_ _ _ _ * 8 0 # (siren and strobe are not bypassed)
Use this feature to prevent the siren from sounding and the strobe light from activating
when an alarm event occurs. The internal beeper will however still sound. This feature is
useful in periodic testing of the system.
If Silent Alarm is enabled, the
S symbol under the UNIT label on the keypad will be lit and
on the unit’s LCD, the S symbol linked to the label will be shown.
(No S symbol exists on the DRUID 4-Zone keypad).
Using your keypad
12
MASTER PIN
MASTER PIN
MASTER PIN
MASTER PIN