The unit may be operated by up to two keypads. In this case the NEMTEK tab becomes
optional (Installer programmable feature).
In order to provide different access levels to the unit and its functions, two different types
of users are defined.
A
master user
has full control of the unit and may bypass different alarm functions. Only
the master user may change the
PIN
(Personal Identification Number) for all users. There
is only one master user with a
default PIN
1234
. The master user is referred to as
user
number 1
or
PIN 1
.
A
reset user
can acknowledge and silence alarm events and clear alarms and events from
history, but cannot switch the unit on or off or change any parameters or settings that
require PIN access. There is only one reset user with a
default PIN 5555
. The reset user
is referred to as
user number 2
or
PIN 2
.
Most user functions are accessed using the master PIN followed by a
*
key, a two-key
sequence, and then completed with the
#
(enter) key. The two key sequence consists of a
function key and then a
1
(yes) or
0
(no) key to indicate if the function is to be
enabled
(yes) or
disabled
(no).
The exception to the above is the
Panic Alarm
and
Display Info
functions.
Both of these functions do not need the master PIN and
*
key sequence in front of the
two-key sequence, however the codes will still work if the master PIN and
*
key sequence
is inserted.
Additionally, the Display Info function accepts more than just the
1
and
0
keys as will be
detailed later in this manual.
Altering the brightness of the keypad symbols
The brightness of the keypad symbols can be increased or decreased by pressing and
holding the
1
or
7
key respectively. The keypad will beep while the indicator brightness is
changing. No PIN is required for this operation.
Operation with a keypad
10
Содержание Druid LCD 20
Страница 1: ...Druid LCD 20 Fence Monitor User Manual...
