Tools Required
Parts Included
867H-2 Seat Booth
867H-L Seat Booth
867H-R Seat Booth
Nemschoff Palisade 2.0
2 Seat Booth, 1 Seat LSF and RSF Booth
Installation Instructions
How to assemble your 2 seat booth,
1 seat LSF and RSF booth.
Step 1
Step 2
867H-2 Seat Booth
Utility Knife
Power Drive
1.1 Feel for hole with finger, then carefully cut with sharp utility knife by
using approximate measurement given below.
1.2 Remove fabric from area around bracket mounting hole location, top
bracket mounting locations. Take care not to extend fabric cuts more than
¼ inch from hole center.
(This Step is supposed to be done in the factory but just in case
here is what needs to be done)
7-5/8”
7-5/8”
1-3/4”
1-3/4”
2.1 Repeat same for other hole mounting location.
Utility Knife
Utility Knife
Seat Booth (LSF)
Seat Booth (LSF)
Seat Booth (RSF)
Seat Booth (RSF)
Table Assembly
Table Assembly
Table Assembly
Back Extension (2 Seat)
Back Extension (RSF)
Back Extension (LSF)
1
Nemschoff for Palisade 2.0
Assembly Instructions
1BP8JN rev A
