2
Nemschoff for Palisade 2.0
Assembly Instructions
1BP8JN rev A
Step 3
Step 4
3.1 Install the back tube by using 2 flat washers and 2 round head machine
screws (2” long).
3.2 Repeat the same for other side.
4.1 Attach the support center by using 4 flat washers and 4 round head
machine screws (0.625” Long).
4.2 Repeat the same for other side.
Step 5
Step 6
5.1 Install the back extension assembly in between the seats and secure with 2
flat washers and 2 round head machine screws (2.5” long) at the top.
5.2 Then install the assembly by using 4 flat wahsers and 4 round head machine
screws (2” long) at the bottom.
6.1 Attach the Z-Bracket by using 4 screws as shown below.
Back Tube
Flat Washer
Round head
Machine Screw
Support Center
Round head
Machine Screw
Flat Washer
Flat
Washer
Round head
Machine Screw
Back Extension
Assembly
Flat
Washer
Round head
Machine Screw
Z-Bracket
Screw