5
Nemschoff for Palisade 2.0
Assembly Instructions
1BP8JN rev A
7.1 Install the access panel by using the L-Bracket screws, 1 flat washer
and 1 round head machine screw (0.5” long).
Step 7
Step 8
Round head
Machine Screw
Access Panel
Screw
Flat Washer
8.1 Install the table assembly by using 6 flat washers and 6 round head
machine screws (0.625” long), (4 at the bottom and 2 at the back)
as shown below.
Round head
Machine Screw
Round
head
Machine
Screw
Flat
Washer
Flat
Washer
Table Assembly
867H-R Seat Booth
Step 1
1.1 Feel for hole with finger, then carefully cut with sharp utility knife by
using approximate measurement given below.
1.2 Remove fabric from area around bracket mounting hole location, top
bracket mounting locations. Take care not to extend fabric cuts more than
¼ inch from hole center.
(This Step is supposed to be done in the factory but just in case
here is what needs to be done)
7-5/8”
1-3/4”
Utility Knife
