15
KEN002VKM
v1a • 17.04.2020
EN
STEP 6
Secure the holding plates (14) with the fixing screws (13) to the wall bracket (8)
12
13
14
15
CAUTION
●
Pay attention to ensure that the holding plates (14) are hooked into the front fixture rail (15).
STEP 7
Connect the awning motor (3) as shown.
3
hex key: 5 mm
N
L
PE
blue
brown
yellow/green
STEP 8
Mounting the wall bracket for the radio remote control. The mounting material for the wall bracket of the radio
remote control is not a component of this scope of delivery. Select suitable dowels and screws for the mounting
location you want. Locate a suitable place indoors and drill two holes for attaching the base (23). Use a cable
detector prior to drilling to prevent damaging electric cables or water pipes.
Insert the two small dowels into the drill holes. Insert the two screws into the dowels and mount the base to the
wall.